ikan Uploader :
Directory : /lib/modules/4.15.0-1044-aws/build/arch/blackfin/include/asm/
Upload File : |
| Current File : //lib/modules/4.15.0-1044-aws/build/arch/blackfin/include/asm/bfin_dma.h |
/*
* bfin_dma.h - Blackfin DMA defines/structures/etc...
*
* Copyright 2004-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef __ASM_BFIN_DMA_H__
#define __ASM_BFIN_DMA_H__
#include <linux/types.h>
/* DMA_CONFIG Masks */
#define DMAEN 0x0001 /* DMA Channel Enable */
#define WNR 0x0002 /* Channel Direction (W/R*) */
#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */
#ifdef CONFIG_BF60x
#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */
#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */
#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */
#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */
#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */
#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */
#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */
#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */
#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */
#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */
#define DI_EN_X 0x00100000 /* Data Interrupt Enable in X count */
#define DI_EN_Y 0x00200000 /* Data Interrupt Enable in Y count */
#define DI_EN_P 0x00300000 /* Data Interrupt Enable in Peripheral */
#define DI_EN DI_EN_X /* Data Interrupt Enable */
#define NDSIZE_0 0x00000000 /* Next Descriptor Size = 1 */
#define NDSIZE_1 0x00010000 /* Next Descriptor Size = 2 */
#define NDSIZE_2 0x00020000 /* Next Descriptor Size = 3 */
#define NDSIZE_3 0x00030000 /* Next Descriptor Size = 4 */
#define NDSIZE_4 0x00040000 /* Next Descriptor Size = 5 */
#define NDSIZE_5 0x00050000 /* Next Descriptor Size = 6 */
#define NDSIZE_6 0x00060000 /* Next Descriptor Size = 7 */
#define NDSIZE 0x00070000 /* Next Descriptor Size */
#define NDSIZE_OFFSET 16 /* Next Descriptor Size Offset */
#define DMAFLOW_LIST 0x00004000 /* Descriptor List Mode */
#define DMAFLOW_LARGE DMAFLOW_LIST
#define DMAFLOW_ARRAY 0x00005000 /* Descriptor Array Mode */
#define DMAFLOW_LIST_DEMAND 0x00006000 /* Descriptor Demand List Mode */
#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Descriptor Demand Array Mode */
#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Running Indicator (DFETCH) */
#define DMA_RUN 0x00000200 /* DMA Channel Running Indicator */
#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Running Indicator (WAIT TRIG) */
#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Running Indicator (WAIT ACK) */
#else
#define PSIZE_16 0x0000 /* Transfer Word Size = 16 */
#define PSIZE_32 0x0000 /* Transfer Word Size = 32 */
#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
#define RESTART 0x0020 /* DMA Buffer Clear */
#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
#define DI_EN 0x0080 /* Data Interrupt Enable */
#define DI_EN_X 0x00C0 /* Data Interrupt Enable in X count*/
#define DI_EN_Y 0x0080 /* Data Interrupt Enable in Y count*/
#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
#define NDSIZE 0x0f00 /* Next Descriptor Size */
#define NDSIZE_OFFSET 8 /* Next Descriptor Size Offset */
#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
#endif
#define DMAFLOW 0x7000 /* Flow Control */
#define DMAFLOW_STOP 0x0000 /* Stop Mode */
#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
/* DMA_IRQ_STATUS Masks */
#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
#ifdef CONFIG_BF60x
#define DMA_PIRQ 0x0004 /* DMA Peripheral Error Interrupt Status */
#else
#define DMA_PIRQ 0
#endif
/*
* All Blackfin system MMRs are padded to 32bits even if the register
* itself is only 16bits. So use a helper macro to streamline this.
*/
#define __BFP(m) u16 m; u16 __pad_##m
/*
* bfin dma registers layout
*/
struct bfin_dma_regs {
u32 next_desc_ptr;
u32 start_addr;
#ifdef CONFIG_BF60x
u32 cfg;
u32 x_count;
u32 x_modify;
u32 y_count;
u32 y_modify;
u32 pad1;
u32 pad2;
u32 curr_desc_ptr;
u32 prev_desc_ptr;
u32 curr_addr;
u32 irq_status;
u32 curr_x_count;
u32 curr_y_count;
u32 pad3;
u32 bw_limit_count;
u32 curr_bw_limit_count;
u32 bw_monitor_count;
u32 curr_bw_monitor_count;
#else
__BFP(config);
u32 __pad0;
__BFP(x_count);
__BFP(x_modify);
__BFP(y_count);
__BFP(y_modify);
u32 curr_desc_ptr;
u32 curr_addr;
__BFP(irq_status);
__BFP(peripheral_map);
__BFP(curr_x_count);
u32 __pad1;
__BFP(curr_y_count);
u32 __pad2;
#endif
};
#ifndef CONFIG_BF60x
/*
* bfin handshake mdma registers layout
*/
struct bfin_hmdma_regs {
__BFP(control);
__BFP(ecinit);
__BFP(bcinit);
__BFP(ecurgent);
__BFP(ecoverflow);
__BFP(ecount);
__BFP(bcount);
};
#endif
#undef __BFP
#endif
Kontol Shell Bypass