ikan Uploader :
Directory : /proc/self/root/lib/modules/5.4.0-1101-aws/build/arch/mips/include/asm/mach-ralink/
Upload File : |
| Current File : //proc/self/root/lib/modules/5.4.0-1101-aws/build/arch/mips/include/asm/mach-ralink/rt288x.h |
/* SPDX-License-Identifier: GPL-2.0-only */
/*
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2013 John Crispin <john@phrozen.org>
*/
#ifndef _RT288X_REGS_H_
#define _RT288X_REGS_H_
#define RT2880_SYSC_BASE 0x00300000
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
#define SYSC_REG_CHIP_ID 0x0c
#define SYSC_REG_SYSTEM_CONFIG 0x10
#define SYSC_REG_CLKCFG 0x30
#define RT2880_CHIP_NAME0 0x38325452
#define RT2880_CHIP_NAME1 0x20203038
#define CHIP_ID_ID_MASK 0xff
#define CHIP_ID_ID_SHIFT 8
#define CHIP_ID_REV_MASK 0xff
#define SYSTEM_CONFIG_CPUCLK_SHIFT 20
#define SYSTEM_CONFIG_CPUCLK_MASK 0x3
#define SYSTEM_CONFIG_CPUCLK_250 0x0
#define SYSTEM_CONFIG_CPUCLK_266 0x1
#define SYSTEM_CONFIG_CPUCLK_280 0x2
#define SYSTEM_CONFIG_CPUCLK_300 0x3
#define RT2880_GPIO_MODE_I2C BIT(0)
#define RT2880_GPIO_MODE_UART0 BIT(1)
#define RT2880_GPIO_MODE_SPI BIT(2)
#define RT2880_GPIO_MODE_UART1 BIT(3)
#define RT2880_GPIO_MODE_JTAG BIT(4)
#define RT2880_GPIO_MODE_MDIO BIT(5)
#define RT2880_GPIO_MODE_SDRAM BIT(6)
#define RT2880_GPIO_MODE_PCI BIT(7)
#define CLKCFG_SRAM_CS_N_WDT BIT(9)
#define RT2880_SDRAM_BASE 0x08000000
#define RT2880_MEM_SIZE_MIN 2
#define RT2880_MEM_SIZE_MAX 128
#endif
Kontol Shell Bypass