ikan Uploader :
Directory : /proc/self/root/lib/modules/5.4.0-1101-aws/build/arch/powerpc/include/asm/book3s/64/
Upload File : |
| Current File : //proc/self/root/lib/modules/5.4.0-1101-aws/build/arch/powerpc/include/asm/book3s/64/kup-radix.h |
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
#define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
#include <linux/const.h>
#define AMR_KUAP_BLOCK_READ UL(0x4000000000000000)
#define AMR_KUAP_BLOCK_WRITE UL(0x8000000000000000)
#define AMR_KUAP_BLOCKED (AMR_KUAP_BLOCK_READ | AMR_KUAP_BLOCK_WRITE)
#define AMR_KUAP_SHIFT 62
#ifdef __ASSEMBLY__
#ifdef CONFIG_PPC_KUAP
.macro kuap_restore_amr gpr
BEGIN_MMU_FTR_SECTION_NESTED(67)
ld \gpr, STACK_REGS_KUAP(r1)
mtspr SPRN_AMR, \gpr
END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67)
.endm
.macro kuap_check_amr gpr1, gpr2
#ifdef CONFIG_PPC_KUAP_DEBUG
BEGIN_MMU_FTR_SECTION_NESTED(67)
mfspr \gpr1, SPRN_AMR
li \gpr2, (AMR_KUAP_BLOCKED >> AMR_KUAP_SHIFT)
sldi \gpr2, \gpr2, AMR_KUAP_SHIFT
999: tdne \gpr1, \gpr2
EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67)
#endif
.endm
#endif
.macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr
#ifdef CONFIG_PPC_KUAP
BEGIN_MMU_FTR_SECTION_NESTED(67)
.ifnb \msr_pr_cr
bne \msr_pr_cr, 99f
.endif
mfspr \gpr1, SPRN_AMR
std \gpr1, STACK_REGS_KUAP(r1)
li \gpr2, (AMR_KUAP_BLOCKED >> AMR_KUAP_SHIFT)
sldi \gpr2, \gpr2, AMR_KUAP_SHIFT
cmpd \use_cr, \gpr1, \gpr2
beq \use_cr, 99f
// We don't isync here because we very recently entered via rfid
mtspr SPRN_AMR, \gpr2
isync
99:
END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67)
#endif
.endm
#else /* !__ASSEMBLY__ */
#include <linux/jump_label.h>
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
#ifdef CONFIG_PPC_KUAP
#include <asm/reg.h>
/*
* We support individually allowing read or write, but we don't support nesting
* because that would require an expensive read/modify write of the AMR.
*/
static inline void set_kuap(unsigned long value)
{
if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP))
return;
/*
* ISA v3.0B says we need a CSI (Context Synchronising Instruction) both
* before and after the move to AMR. See table 6 on page 1134.
*/
isync();
mtspr(SPRN_AMR, value);
isync();
}
static inline bool
bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
{
return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) &&
(regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
"Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
}
#else /* CONFIG_PPC_KUAP */
static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) { }
static inline void set_kuap(unsigned long value) { }
#endif /* !CONFIG_PPC_KUAP */
static __always_inline void allow_user_access(void __user *to, const void __user *from,
unsigned long size, unsigned long dir)
{
// This is written so we can resolve to a single case at build time
BUILD_BUG_ON(!__builtin_constant_p(dir));
if (dir == KUAP_READ)
set_kuap(AMR_KUAP_BLOCK_WRITE);
else if (dir == KUAP_WRITE)
set_kuap(AMR_KUAP_BLOCK_READ);
else
set_kuap(0);
}
static inline void prevent_user_access(void __user *to, const void __user *from,
unsigned long size, unsigned long dir)
{
set_kuap(AMR_KUAP_BLOCKED);
if (static_branch_unlikely(&uaccess_flush_key))
do_uaccess_flush();
}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */
Kontol Shell Bypass