ikan Uploader :
Directory : /proc/self/root/lib/modules/5.4.0-1101-aws/build/include/linux/platform_data/
Upload File : |
| Current File : //proc/self/root/lib/modules/5.4.0-1101-aws/build/include/linux/platform_data/pxa2xx_udc.h |
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This supports machine-specific differences in how the PXA2xx
* USB Device Controller (UDC) is wired.
*
* It is set in linux/arch/arm/mach-pxa/<machine>.c or in
* linux/arch/mach-ixp4xx/<machine>.c and used in
* the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
*/
#ifndef PXA2XX_UDC_H
#define PXA2XX_UDC_H
struct pxa2xx_udc_mach_info {
int (*udc_is_connected)(void); /* do we see host? */
void (*udc_command)(int cmd);
#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */
#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */
/* Boards following the design guidelines in the developer's manual,
* with on-chip GPIOs not Lubbock's weird hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
* here. Note that sometimes the signals go through inverters...
*/
bool gpio_pullup_inverted;
int gpio_pullup; /* high == pullup activated */
};
#endif
Kontol Shell Bypass