ikan Uploader :
Directory : /proc/thread-self/root/lib/modules/4.15.0-1044-aws/build/drivers/clk/sunxi-ng/
Upload File : |
| Current File : //proc/thread-self/root/lib/modules/4.15.0-1044-aws/build/drivers/clk/sunxi-ng/Makefile |
# SPDX-License-Identifier: GPL-2.0
# Common objects
lib-$(CONFIG_SUNXI_CCU) += ccu_common.o
lib-$(CONFIG_SUNXI_CCU) += ccu_mmc_timing.o
lib-$(CONFIG_SUNXI_CCU) += ccu_reset.o
# Base clock types
lib-$(CONFIG_SUNXI_CCU) += ccu_div.o
lib-$(CONFIG_SUNXI_CCU) += ccu_frac.o
lib-$(CONFIG_SUNXI_CCU) += ccu_gate.o
lib-$(CONFIG_SUNXI_CCU) += ccu_mux.o
lib-$(CONFIG_SUNXI_CCU) += ccu_mult.o
lib-$(CONFIG_SUNXI_CCU) += ccu_phase.o
lib-$(CONFIG_SUNXI_CCU) += ccu_sdm.o
# Multi-factor clocks
lib-$(CONFIG_SUNXI_CCU) += ccu_nk.o
lib-$(CONFIG_SUNXI_CCU) += ccu_nkm.o
lib-$(CONFIG_SUNXI_CCU) += ccu_nkmp.o
lib-$(CONFIG_SUNXI_CCU) += ccu_nm.o
lib-$(CONFIG_SUNXI_CCU) += ccu_mp.o
# SoC support
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_A83T_CCU) += ccu-sun8i-a83t.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
obj-$(CONFIG_SUN8I_DE2_CCU) += ccu-sun8i-de2.o
obj-$(CONFIG_SUN8I_R_CCU) += ccu-sun8i-r.o
obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
# The lib-y file goals is supposed to work only in arch/*/lib or lib/. In our
# case, we want to use that goal, but even though lib.a will be properly
# generated, it will not be linked in, eventually resulting in a linker error
# for missing symbols.
#
# We can work around that by explicitly adding lib.a to the obj-y goal. This is
# an undocumented behaviour, but works well for now.
obj-$(CONFIG_SUNXI_CCU) += lib.a
Kontol Shell Bypass