ikan Uploader :
Directory : /proc/thread-self/root/lib/modules/5.4.0-1101-aws/build/arch/arm/mach-pxa/include/mach/
Upload File : |
| Current File : //proc/thread-self/root/lib/modules/5.4.0-1101-aws/build/arch/arm/mach-pxa/include/mach/poodle.h |
/*
* arch/arm/mach-pxa/include/mach/poodle.h
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* Based on:
* arch/arm/mach-sa1100/include/mach/collie.h
*
* ChangeLog:
* 04-06-2001 Lineo Japan, Inc.
* 04-16-2001 SHARP Corporation
* Update to 2.6 John Lenz
*/
#ifndef __ASM_ARCH_POODLE_H
#define __ASM_ARCH_POODLE_H 1
#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/*
* GPIOs
*/
/* PXA GPIOs */
#define POODLE_GPIO_ON_KEY (0)
#define POODLE_GPIO_AC_IN (1)
#define POODLE_GPIO_CO 16
#define POODLE_GPIO_TP_INT (5)
#define POODLE_GPIO_TP_CS (24)
#define POODLE_GPIO_WAKEUP (11) /* change battery */
#define POODLE_GPIO_GA_INT (10)
#define POODLE_GPIO_IR_ON (22)
#define POODLE_GPIO_HP_IN (4)
#define POODLE_GPIO_CF_IRQ (17)
#define POODLE_GPIO_CF_CD (14)
#define POODLE_GPIO_CF_STSCHG (14)
#define POODLE_GPIO_SD_PWR (33)
#define POODLE_GPIO_SD_PWR1 (3)
#define POODLE_GPIO_nSD_CLK (6)
#define POODLE_GPIO_nSD_WP (7)
#define POODLE_GPIO_nSD_INT (8)
#define POODLE_GPIO_nSD_DETECT (9)
#define POODLE_GPIO_MAIN_BAT_LOW (13)
#define POODLE_GPIO_BAT_COVER (13)
#define POODLE_GPIO_USB_PULLUP (20)
#define POODLE_GPIO_ADC_TEMP_ON (21)
#define POODLE_GPIO_BYPASS_ON (36)
#define POODLE_GPIO_CHRG_ON (38)
#define POODLE_GPIO_CHRG_FULL (16)
#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */
/* PXA GPIOs */
#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0)
#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4)
#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16)
#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11)
#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10)
#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8)
#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13)
/* SCOOP GPIOs */
#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13
#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18
#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20
#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21
#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
#define POODLE_GPIO_L_PCLK (POODLE_SCOOP_GPIO_BASE + 9)
#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10)
#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11)
#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */
extern struct platform_device poodle_locomo_device;
#endif /* __ASM_ARCH_POODLE_H */
Kontol Shell Bypass